Viewing the Cisco RV180/RV180W Status
Viewing VPN Client Connection Status
Cisco RV180/RV180W Administration Guide 168
8
Viewing VPN Client Connection Status
The VPN Client Connection Status page displays the status of VPN connections.
To view VPN user connection status:
STEP 1 Choose Status > VPN Client Connection Status.
STEP 2 Click Stop.
STEP 3 In the Poll Interval field, enter the number of seconds the router waits before
updating the information on this page.
STEP 4 Click Start to restart automatic refresh at the specified poll interval.
The VPN Client Connection Status page displays this information:
State The current status of the SA for IKE policies. The
status can be IPsec SA Established or IPsec SA
Not Established.
Action Click Connect to establish an inactive SA
connection.
Click Drop to terminate an active SA connection.
Username The username of the VPN user associated with the
QuickVPN or PPTP tunnel.
Remote IP Displays the IP address of the remote QuickVPN
client. This could be a NAT/Public IP if the client is
behind the NAT router.
Status Displays the current status of QuickVPN client.
OFFLINE means that QuickVPN tunnel is not
initiated/established by the VPN user. ONLINE
means that QuickVPN Tunnel, initiated/established
by the VPN user, is active.
Start Time The time of the VPN user establishing a connection.
To Next Page
Loading...
