Cisco RV180W - Configuring the LAN (Local Network) Settings

Configuring Networking
Configuring the LAN (Local Network) Settings
Cisco RV180/RV180W Administration Guide 31
2
STEP 4 Click Save. The profile is added to the Profile Table.
Configuring the LAN (Local Network) Settings
If you have an IPv4 network, use these sections to configure your LAN settings. If
you have an IPv6 network, see Configuring IPv6 LAN Properties, page 50.
Connection Type Choose the connection type:
• Keep connected—The Internet connection is
always on.
• Idle Time—The Internet connection is on only
when traffic is present. If the connection is
idle—that is, no traffic is occurring during the
specified time period—the connection is
closed. You might want to choose this option
if your ISP charges based on connection
time.
Idle Time If you choose Idle Time as the connection type,
enter the number of minutes after which the
connection terminates. The valid range is 5–999.