Cisco SGE2000 User Manual

95
Chapter 5: Configuring Device Interfaces
Defining LAG Management
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
5
Lag Management Page
The Lag Management Page contains the following fields.
• LAG — Displays the LAG number.
• Name — Displays the LAG name.
• Link State — Displays the link operational status.
• Member — Displays the ports configured to the LAG.
2. Define the relevant fields.
3. Click Apply. Lag Management is defined, and the device is updated.
Modifying Lag Membership
1. Click Bridging > Port Management > Lag Management. The Lag Management Page opens:
2. Click the Edit button. The Edit LAG Membership Page opens:

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg