Cisco SGE2000 User Manual

89
Chapter 5: Configuring Device Interfaces
Defining Port Settings
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
5
Configuring Device Interfaces
This section contains information for configuring ports and contains the following topic:
• Defining Port Settings
• Defining LAG Management
• Defining LAG Settings
• Configuring LACP
Defining Port Settings
The Port Settings Page contains fields for defining port parameters. To define port settings:
1. Click Bridging > Port Management > Port Settings. The Port Settings Page opens:
Port Settings Page
The Port Settings Page
contains the following fields:
• Copy from Entry Number — Copies port information from the selected port.
• to Entry Number(s) — Copies port information to the selected port.
• Unit Number — Indicates the stacking member for which the ports are defined.
• Interface — Displays the port number.

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg