Cisco SGE2000 User Manual

7
Chapter 1: Getting Started
Using Screen and Table Options
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
1
Using Screen and Table Options
Linksys contains screens and tables for configuring devices. This section contains the following topics:
• Appendix 1, "Adding Device Information"
• Appendix 1, "Modifying Device Information"
• Appendix 1, "Deleting Device Information"
Adding Device Information
User defined information can be added to specific EWS pages, by opening a new Add page. To add
information to tables or EWS pages:
1. Open an EWS page.
2. Click the Add button. An add page opens, for example, the Add SNTP Server Page:
Add SNTP Server
3. Define the fields.
4. Click Apply. The configuration information is saved, and the device is updated.
Modifying Device Information
1. Open the EWS page.
2. Select a table entry.
3. Click the Edit Button. A Modify page opens, for example, the Interface priority Page opens:

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg