Cisco SGE2000 User Manual

122
Chapter 7: Configuring IP Information
Domain Name System
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
7
Host Mapping
The Host Mapping Page provides information for defining DNS Host Mapping. The DNS Host Mapping
Page page contains the following fields.
1. Click System > System Management > Domain Name System > Host Mapping. The Host
Mapping Page opens:
Host Mapping Page
The Host Mapping Page contains the following fields:
• Host Names — Displays a user-defined default domain name. When defined, the default domain
name is applied to all unqualified host names. The Host Name field can contain up to 158 characters.
• IP Address — Displays the DNS host IP address.
2. Click the Add button. The Add DNS Host Page opens:
The Add DNS Host Page provides information for defining DNS Host Mapping.

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg