Cisco SGE2000 User Manual

235
Chapter 15: Configuring System Time
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
15
Configuring System Time
The device supports the Simple Network Time Protocol (SNTP). SNTP assures accurate network device
clock time synchronization up to the millisecond. Time synchronization is performed by a network
SNTP server. The device operates only as an SNTP client, and cannot provide time services to other
systems.
This section provides information for configuring different system time aspects, including:
• Defining System Time
• Defining SNTP Settings
• Defining SNTP Authentication

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg