Cisco SGE2000 User Manual

200
Chapter 12: Configuring Quality of Service
Defining General Settings
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
12
• Defining General Settings
• Defining Advanced Mode
• Defining QoS Basic Mode
The section also contains the following pages:
• Configuring Policy Table
Defining General Settings
The QoS General Settings section contains the following pages:
•Defining CoS
• Defining Queue
• Mapping CoS to Queue
• Mapping DSCP to Queue
• Configuring Bandwidth

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg