197
Chapter 11: Configuring SNMP
Defining Trap Management
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
11
– Included — Sends OID traps or informs.
2. Click the Add button. The Add SNMP Notification Filter Page opens:
Add SNMP Notification Filter Page
The Add SNMP Notification Filter Page contains the following fields:
• Filter Name — Contains a list of user-defined notification filters.
• New Object Identifier Subtree — Displays the OID for which notifications are sent or blocked. If a
filter is attached to an OID, traps or informs are generated and sent to the trap recipients. Object IDs
are selected from either the Select from List or the Object ID List. there are two configuration
options:
– Select from List — Select the OID from the list provided.
– Object ID — Enter an OID not offered in the Select from List option.
• Filter Type — Indicates whether informs or traps are sent regarding the OID to the trap recipients.
– Excluded — Restricts sending OID traps or informs.
– Included — Sends OID traps or informs.
3. Define the relevant fields.
4. Click Apply. The SNMP Notification Filter is added to the list, and the device is updated.
To Next Page
Loading...
Need help?
General
