233
Chapter 14: Managing System Logs
Viewing the Device Memory Logs
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
14
Syslog Server Settings Page
The Syslog Server Settings Page contains the following fields:
• Server — Specifies the server to which logs can be sent.
• UDP Port (1-65535) — Defines the UDP port to which the server logs are sent. The possible range
is 1 to 65535. The default value is 514.
• Facility — Defines a user-defined application from which system logs are sent to the remote server.
Only one facility can be assigned to a single server. If a second facility level is assigned, the first
facility is overridden. All applications defined for a device utilize the same facility on a server. The
field default is Local 7. The possible field values are Local 0 - Local 7.
• Description — Provides a user-defined server description.
• Severity to Include — Indicates the minimum severity from which logs are sent to the server. For
example, if Notice is selected, all logs from a Notice severity and higher are sent to the remote
server.
3. Define the relevant fields.
4. Click Apply. The Syslog Server settings are modified, and the device is updated.
To Next Page
Loading...
Need help?
General
