Cisco SGE2000 User Manual

241
Chapter 15: Configuring System Time
Defining System Time
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
15
SNTP Authentication Page
The SNTP Authentication Page contains the following fields:
• Enable SNTP Authentication — Indicates if authenticating an SNTP session between the device
and an SNTP server is enabled on the device. The possible field values are:
– Checked — Authenticates SNTP sessions between the device and SNTP server.
– Unchecked — Disables authenticating SNTP sessions between the device and SNTP server.
• Encryption Key ID — Defines the Key Identification used to authenticate the SNTP server and
device. The field value is up to 4294967295 characters.
• Authentication Key — Displays the key used for authentication.
• Trusted Key — Indicates the encryption key used (Unicast/Anycast) or elected (Broadcast) to
authenticate the SNTP server.
2. Click the Add button. The Add SNTP Authentication Page opens:

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg