Cisco SGE2000 User Manual

35
Chapter 3: Managing Power-over-Ethernet Devices
DefiningPoE System Information
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
3
– Searching — Indicates that the device is currently searching for a powered device.
Searching is the default PoE operational status.
– Fault — Indicates that the device has detected a fault on the powered device. For example,
the powered device memory could not be read.
3. Define the relevant fields.
4. Click Apply. The PoE Settings are defined, and the device is updated.

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg