53
Chapter 4: Configuring Device Security
Defining Access Method
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
Add Access Profile Page
The Add Access Profile Page contains the following fields:
• Access Profile Name — Defines the access profile name. The access profile name can contain up to
32 characters.
• Rule Priority — Defines the rule priority. When the packet is matched to a rule, user groups are
either granted permission or denied device management access. The rule number is essential to
matching packets to rules, as packets are matched on a first-fit basis. The rule priorities are assigned
in the Profile Rules Page.
• Management Method — Defines the management method for which the rule is defined. Users with
this access profile can access the device using the management method selected. The possible field
values are:
– All — Assigns all management methods to the rule.
– Telnet — Assigns Telnet access to the rule. If selected, users accessing the device using
Telnet meeting access profile criteria are permitted or denied access to the device.
– Secure Telnet (SSH) — Assigns SSH access to the rule. If selected, users accessing the
device using Telnet meeting access profile criteria are permitted or denied access to the
device.
– HTTP — Assigns HTTP access to the rule. If selected, users accessing the device using
HTTP meeting access profile criteria are permitted or denied access to the device.
– Secure HTTP (HTTPS) — Assigns HTTPS access to the rule. If selected, users accessing the
device using HTTPS meeting access profile criteria are permitted or denied access to the
device.
– SNMP — Assigns SNMP access to the rule. If selected, users accessing the device using
SNMP meeting access profile criteria are permitted or denied access to the device.
• Interface — Defines the interface on which the access profile is defined. The possible field values
are:
To Next Page
Loading...
Need help?
General
