63
Chapter 4: Configuring Device Security
Defining Traffic Control
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
To define port security:
1. Click Security Suite > Traffic Control > Port Security. The Port Security Page opens:
Port Security Page
The Port Security Page contains the following fields:
• Ports — Indicates the port number on which port security is configured.
• LAGs — Indicates the LAG number on which port security is configured.
• Of Unit — Displays the stacking member for which the port security parameters are displayed.
• Interface — Displays the port or LAG name.
• Interface Status — Indicates the port security status. The possible field values are:
– Unlocked — Indicates the port is currently unlocked. This is the default value.
– Locked — Indicates the port is currently locked.
• Learning Mode — Defines the locked port type. The Learning Mode field is enabled only if Locked
is selected in the Interface Status field.The possible field values are:
– Classic Lock — Locks the port using the classic lock mechanism. The port is immediately
locked, regardless of the number of addresses that have already been learned.
– Limited Dynamic Lock — Locks the port by deleting the current dynamic MAC addresses
associated with the port. The port learns up to the maximum addresses allowed on the port.
Both relearning and aging MAC addresses are enabled.
To Next Page
Loading...
Need help?
General
