Cisco UCS 5108 Installation Guide

Only the regular power cords or jumper power cords provided with the chassis are supported.Note
Australia and New Zealand
Power Cord Part Number—CAB-AC-16A-AUS
Cord Set Rating—16A, 250 VAC
Figure 51: CAB-AC-16A-AUS Power Cord for the Cisco UCS 5108 Blade Server Chassis
Cordset rating: 16 A, 250 V
Length: 14 ft 0 in. (4.26 m)
140586
Connector: IEC 60320 C19
Plug: AU20S3
Continental Europe
Power Cord Part Number—CAB-AC-2500W-EU
Cord Set Rating—16A, 250 VAC
Figure 52: CAB-AC-2500W-EU Power Cord for the UCS 5108 Blade Server Chassis
Cordset rating: 16 A, 250 V
Length: 14 ft 0 in. (4.26 m)
113360
Connector: IEC 60320 C19
Plug: CEE 7/7
International
Power Cord Part Number—CAB-AC-2500W-INT
Cisco UCS 5108 Server Chassis Installation Guide
92
Technical Specifications
Australia and New Zealand

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable