Cisco UCS 5108 Installation Guide

Cisco UCS 2304 IOM
The Cisco UCS 2304 IOM (Fabric Extender) is an I/O module with 8 40-Gigabit backplane ports and 4
40-Gigabit uplink ports. It can be hot-plugged into the rear of a Cisco UCS 5100 Series blade server chassis.
A maximum of two UCS 2304 IOMs can be installed in a chassis.
The Cisco UCS 2304 IOM joins the third generation of UCS products, including the following hardware:
•
Cisco UCS 6332 fabric interconnect, an Ethernet or Fibre Channel over Ethernet (FCoE) chassis with
32 QSFP+ 40-Gigabit ports
•
Cisco UCS 6332-16UP fabric interconnect, a Ethernet and Fibre Channel chassis with 16 1- or 10-Gigabit
SFP+ ports or 16 4-, 8-, or 16-Gigabit Fibre Channel ports, and 24 40-Gigabit QSFP+ ports
•
Cisco UCS 2304 IOM
•
Multiple VICs
The Cisco UCS 2304 IOM provides chassis management control and blade management control, including
control of the chassis, fan trays, power supply units, and blades. It also multiplexes and forwards all traffic
Cisco UCS 5108 Server Chassis Installation Guide
24
Overview
Cisco UCS 2304 IOM

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable