Cisco UCS 5108 Installation Guide

APPENDIX B
Site Planning and Maintenance Records
For information about how to query the chassis for configuration information, see the Cisco UCS
Configuration Guide.
Note
This appendix includes the following records to use when installing the Cisco UCS server chassis:
•
Site Preparation Checklist, page 97
•
Contact and Site Information, page 99
•
Chassis and Module Information, page 99
•
FEX Port Connection Record, page 101
•
UCS 6324 Fabric Interconnect Port Connection Record, page 102
Site Preparation Checklist
Planning the location and layout of your equipment is essential for successful network operation, ventilation,
and accessibility. Consider heat dissipation when sizing the air-conditioning requirements for an installation.
Table 24: Site Planning Checklist
DateTimeVerified ByPlanning ActivityTask No.
Space evaluation:
•
Space and layout
•
Floor covering
•
Impact and vibration
•
Lighting
•
Maintenance access
1
Cisco UCS 5108 Server Chassis Installation Guide
97

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable