Cisco UCS 5108 Installation Guide

5
The system weight listed here is an estimate for a fully configured system and will vary depending on the devices installed.
Environmental Specifications
Table 17: Environmental Specifications for the Chassis
SpecificationDescription
50 to 95°F (10 to 35°C)
Temperature, operating within altitude: 0 to 10,000
feet (0 to 3,000 meters)
–40 to 149°F (–40 to 65°C)Temperature, non-operating within altitude: 0 to
40,000 feet (0 to 12,000 meters)
Operating: 10-90%, 28°C max. wet bulb
Nonoperating: 5-93%, 38°C max wet bulb
Humidity (RH), noncondensing
Operating – 0 to 10000 feet (0 to 3000 meters) Above
10,000 feet, maximum temperature decreases by 1°C
per 1000 feet (~300 meters) above 10,000 feet
Nonoperating – 40,000 ft (12,000 m)
Altitude
83 dBA—at normal operating temperature.
Sound Pressure Level
Environmental Conditions and Power Requirement Specifications for Twinax
SFP+ Transceivers
Table 18: Environmental Conditions and Power Requirement for the SFP+ Transceiver
UnitMax.Min.SymbolParameter
°C85
–40
TSStorage temperature
°C500TCCase temperature
V3.53.1VCCT,RModule supply voltage
Cisco UCS 5108 Server Chassis Installation Guide
87
Technical Specifications
Environmental Specifications

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable