Cisco UCS 5108 Installation Guide

Removing a Fan Module
Procedure
Step 1
Hold the fan module by its handle.
Step 2
Press down on the spring latch at the top of the fan module.
Step 3
Pull the fan module clear of the chassis.
The chassis is designed to have all fan modules in place and operating at all times. Do not leave a
fan module bay empty for longer than is necessary to replace it with a new fan module.
Note
Cisco UCS 5108 Server Chassis Installation Guide
83
Installing and Removing Components
Removing a Fan Module

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable