CHAPTER 2
Installation
This chapter contains the following sections:
•
Installation Notes and Warnings for the Cisco UCS 5108 Server Chassis, page 41
•
Installing the Chassis, page 46
•
Repacking the Chassis, page 62
•
SFP+ Transceivers, page 62
Installation Notes and Warnings for the Cisco UCS 5108 Server
Chassis
The following notes and warnings apply to all installation tasks:
Before you install, operate, or service the system, see the Regulatory Compliance and Safety Information
for Cisco UCS for important safety information.
Note
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each warning
to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning
Cisco UCS 5108 Server Chassis Installation Guide
41
To Next Page
Loading...
Need help?
General
