Cisco Unity User Manual

CHAPTER 2:
Installation overview
23
Task list:
Unified
messaging
in an existing
Exchange site
Turnkey system
1 Review the installer’s checklist. See page 28.
2 Export information from Repartee or Replay Plus. See
page 31.
3 Install or reseat voice and fax boards. See page 33.
4 Set up the Unity server. See page 40.
5 Install Windows NT Server. See page 49.
6 Confirm that the Unity server is getting an IP address. See
page 54.
7 Establish trust relationships (only if the Unity server is a
Windows NT PDC). See page 56.
8 Add account permissions. See page 58.
9 Install Exchange Server. See page 60.
10 Install Microsoft Data Access Components. See page 63.
11 Install other software. See page 64.
12 Install Unity and ActiveFax. See page 69.
13 Set up fax ports for ActiveFax. See page 75.
14 Create an Outlook user profile. See page 80.
15 Create an emergency repair disk. See page 82.
16 Configure Unity to work with the phone system. See
page 86.
17 Program the phone system. See page 90.
18 Test the integration. See page 92.
Continued

Cisco Unity Specifications

General

Supported Operating Systems	Windows Server
Database Support	Microsoft SQL Server
Type	Voicemail and Unified Messaging
Integration	Microsoft Exchange
Voicemail Storage	Depends on configuration and storage capacity
User Capacity	Varies by version and configuration
Languages Supported	Multiple languages
Security Features	Encryption, Access Control