Cisco Unity - Assigning a Static Ip Address

UNITY INSTALLATION GUIDE
48
Assigning a static
Continued
IP address
e If TCP/IP is installed, click “TCP/IP protocol” in the list and
click “Properties.”
If TCP/IP is not installed, add it, click it in the list, and click
“Properties.”
f Specify the IP address, subnet mask, and default gateway.
g Click “OK.”
h Restart the Unity server. For more information, see “Shut-
ting down and starting Unity,” on page 164.
Next section
TURNKEY SYSTEM
Voice mail with LAN admin Confirming that the Unity or ActiveFax server
is getting an IP address, page 54
Unified, one Exchange server
Unity server is a PDC Confirming that the Unity or ActiveFax server
is getting an IP address, page 54