Cisco Unity - Exporting Information from Repartee or Replay Plus

CHAPTER 3:
Installing a Unity system
31
Exporting
information
from Repartee
or Replay Plus
If the previous voice messaging system was not a Repartee or
Replay Plus system, skip to the next section, “Installing or
reseating voice and fax boards,” on page 33.
For an upgrade to Unity from Repartee version 7.40 or later or
from Replay Plus version 6.7 or later, the following subscriber
information from the previous system can be used:
◆
Names
◆
Extensions
◆
Call transfer settings
In this section, you export the subscriber information to disk
for later use. The information is imported when subscribers
are added. (Subscriber information also can be imported from
Exchange and from phone systems and other voice messaging
systems that can generate comma-delimited files.)
To export from Repartee version 7.40 or later
a At the Banner screen, press F2.
b Select “Reports.”
c Select “Directory reports.”
d Select “Extension report.”
e Select “Copy.”
f Insert a blank disk in drive A.
g Specify a drive letter and file name, for example,
A:\Extensio.rpt, and save the report to the disk.
h Remove the disk and set it aside for later use.
Continued
DO THIS SECTION?
TURNKEY
SYSTEM
YES NO
see
page
All configurations
✓
COMPONENT
SYSTEM
All configurations
✓
ACTIVEFAX SERVER
33