Cisco Unity - To test the hunt group; To test identified subscriber messaging

UNITY INSTALLATION GUIDE
90
Programming
the phone
system
In this section, you program the phone system to work with
Unity. The instructions that you use depend on whether a Unity
Integration Guide came with Unity. The guide is provided for inte-
grations with the following phone systems:
◆
Centrex/SMDI
◆
Cisco CallManager
◆
Fujitsu 9600/SMDI
◆
Lucent/Calista
◆
Mitel/Calista
◆
Mitel SX-2000 T1
◆
Mitel/Voice Technologies Group VoiceBridge 2000
◆
NEC NEAX
®
2400 with LAN MCI
◆
NEC NEAX 2400 with serial MCI
◆
Norstar VMI
◆
Nortel/Calista
◆
Toshiba DK280/424 SMDI
Without the Unity Integration Guide
Program the phone system
by doing the following procedure.
With the Unity Integration Guide
Program the phone system by
using the related chapter in the guide.
DO THIS SECTION?
TURNKEY
SYSTEM
YES NO
see
page
All configurations
✓
COMPONENT
SYSTEM
All configurations
✓