Cisco Unity - CP4;LSI Series 1; Installing or Reseating Voice and Fax Boards; Voice Boards

CHAPTER 3:
Installing a Unity system
33
Installing or
reseating voice
and fax boards
Do this section if you are installing a new Unity system. For
information on adding or changing voice or fax boards, see
“Upgrading a Unity or ActiveFax server,” on page 100.
DO THIS SECTION?
TURNKEY
SYSTEM
YES NO
see
page
All configurations
✓
COMPONENT
SYSTEM
All configurations
✓
ACTIVEFAX SERVER
✓
Voice boards supported in Unity
Board Bus
Dialogic D/41D™, version 3 or later ISA
Dialogic D/41EPCI™ PCI
Dialogic D/41ESC™, version 3 or later ISA
Dialogic D/41ESC-Euro ISA
Dialogic D/120JCT-LS PCI
Dialogic D/160SC ISA
Dialogic D/160SC-LS™, version 2 or later ISA
Dialogic D/240PCI -T1™ PCI
Natural MicroSystems AG 2000 PCI
NMS AG Dual T1 PCI
NMS AG-T1 ISA
Fax boards supported in Unity
Board Bus
Dialogic GammaLink
®
CP4/LSI™, series 1 ISA
Dialogic GammaLink CP4/LSI, series 2 ISA
Dialogic GammaLink CPD/220™ ISA
Dialogic GammaLink CPi/200™ ISA
Dialogic GammaLink CPi/200 PCI™ PCI
Dialogic GammaLink CPi/400 PCI™ PCI
Natural MicroSystems AG 2000 PCI
Feature-set boards supported in Unity
Board Bus
Voice Technologies Group VoiceBridge 2000 for Mitel ISA