108
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engine: 4HW
Removing (continued).
Action the roller (3), using tool [2], until the tool [1] is positioned in the pegging hole (A).
Remove the belt.
ESSENTIAL: Check that the rollers (3) and (4) turn freely (no play, no tight spot).
Refitting.
IMPERATIVE: If re-using the belt, refit it respecting the direction of rotation marked on removal.
Refit the belt, finishing with the tensioner roller (3).
ESSENTIAL: Check that the belt is correctly positioned in the grooves of the various pulleys.
Rotate the engine four times.
Complete the refitting.
B1BK1IWD
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 108
To Next Page
Loading...
