231
CLUTCH
GEARBOX
TRANSMISSION
ML/6C GEARBOX CONTROLS: CHECKS AND ADJUSTMENTS
Engines: RHL - RHR
Adjustments.
NOTE: The gear engagement control cable is not adjustable.
IMPORTANT: Adjust the selection control cable each time it is changed.
E: Position locked
F: Position unlocked
To unlock the length of the gear selection control cable sleeve:
- Move the cylinder "c" in the direction of the arrow "b".
- Pull the locking key "e" in the direction of the arrow "d".
To unlock a sleeve stop:
- Press on the tabs of the fixing (9) at "f".
- Disengage the sleeve stops from their supports, by lifting them.
B2CP3XQC
C5
B2CP3XPD
Angl.T3-page207-255-2005. 4/02/05 15:19 Page 231