CITROEN C8 2005 - Height of the Vehicle at the Front at Reference Height (H1 = R1 - L1)

274
AXLES
SUSPENSION
STEERING
FRONT AXLE GEOMETRY
Setting at reference height
Height of the vehicle at the front at reference height (H1 = R1 - L1)
Engage the straps [3] with their shackles [2] on the subframe.
Position the suspension compressor [1], selecting the separation (a) most suited to pull the
straps as far upwards as possible.
Compress the suspension so as to obtain, on the RH and LH sides, the bodyshell height
H1 (reference height), to be measured between the bottom of the subframe (b) at the front
fixing of the wishbone, and the ground.
WARNING: Take account of pivoting surfaces when measuring the reference height H1.
NOTE: Only the tracking is adjustable.
WARNING: The tracking value varies as a function of the vehicle height.
C4AP1ATD
C4AP1AUC
C8
Angl. T3-page256-281-2005 4/02/05 15:25 Page 274