1
GENERALGENERAL
IDENTIFICATION OF VEHICLES
E1APO8RD
A- Chassis stamp
(cold stamp on bodywork).
B - Manufacturer's data plate
(under the rear bench seat).
C - A-S/RP No. and RP paint code
(label on front pillar close to driver's door).
D - Inflation pressures and tyre references
(label on front pillar close to driver's door).
E - Serial no. on bodywork.
F - Gearbox reference - Factory serial no.
G - Engine legislation type - Factory serial no.
C5
Angl. T3 page001-31-2005 4/02/05 14:15 Page 1