CITROEN C8 2005 - Conditions for Adjustment; To Bed in the Parking Brake Cables, Operate as Follows; Checking and Adjusting the Parking Brake

BRAKES
288
B3FP7DCD
CHECKING AND ADJUSTING THE PARKING BRAKE
ESSENTIAL: Respect the safety and cleanliness requirements.
Remove the central console (see corresponding operation).
Raise and supprt the vehicle on a 2-column lift.
To bed in the parking brake cables, operate as follows:
With the engine running:
- Press 5 times on the brake pedal in order to place the braking circuit under pressure.
- Apply and release the parking brake lever 5 times.
Conditions for adjustment:
- Parking brake lever in the released position.
- Check that the parking brake cables are correctly routed.
- Check that the LH and RH caliper levers (2) are against the screws (1).
Admissible clearance between the caliper lever (2) and the parking brake cable attachment:
X = 0 to 1 mm.
C5
Angl.T3-page282-299-2005 4/02/05 15:29 Page 288