CITROEN C8 2005 - Height of the Vehicle at the Rear at Reference Height (H2 = R2 + L2)

275
AXLES
SUSPENSION
STEERING
REAR AXLE GEOMETRY
Setting at reference height
Height of the vehicle at the rear at reference height (H2 = R2 + L2)
Engage the slings [4] on the rear longerons.
Position the suspension compressor [1] selecting the separation (a) most suited to pull
the straps as far upwards as possible.
Compress the suspension so as to obtain, on the RH and LH sides, the bodyshell
height H2 (reference height), to be measured between the bottom of the longeron «c»
and the ground.
WARNING: Take account of pivoting surfaces when measuring the reference
height H2.
Check that the height H1, measured already at the front, has not changed.
WARNING: The rear axle angles are not adjustable.
C4BP1CND
B3BP18GC
C8
Angl. T3-page256-281-2005 4/02/05 15:25 Page 275