CITROEN C8 2005 - Engines: RHM-RHT-RHW-4 HW

180
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines: RHM - RHT - RHW - 4HW
Tools.
[1] Instrument for measuring belt tension SEEM C.TRONIC : (-).0192
[2] Crankshaft setting peg (engine DW12TED4) : (-).0188-X
[3] Camshaft peg : (-).0188-M
[4] Belt retaining pin : (-).0188-K
[5] Engine flywheel stop : (-).0188-F
[7] Tensioning lever : (-).0188-J2
[8] Pulley extractor : (-).0188-P
[9] Crankshaft setting peg (engine DW10ATED4) : (-).0188-Y
[10] Crossmember : 4090-T
[11] Tie-bar support : 4176-T
[12] Retaining support : (-).0911-J
[13] Support with adjustable screw : (-).0911-H
[14] Set of plugs : (-).0188-T
Removing.
Remove:
- The front RH splashshield.
- The under-engine shield.
- The auxiliary drive belt (see corresponding operation).
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 180