240
CLUTCH
GEARBOX
TRANSMISSION
AL4 GEARBOX: CONTROL SPECIFICATIONS
Engine: RFJ
On refitting.
Refitting the gearbox control.
New gear selection control.
Couple the ball-joint (3).
Push in the component (16) without bending the cable.
Release the component (16).
Lock the adjustment by means of component (17).
Check all the gear selection control positions.
Re-used gear selection control.
Unlock component (17).
Release the component (16).
Couple the ball-joint (3).
Push in the component (16) without bending the cable.
Release the component (16).
Lock the adjustment by means of component (17).
Check all the gear selection control positions.
B2CP3DWD
C5
Angl.T3-page207-255-2005. 4/02/05 15:19 Page 240