CITROEN C8 2005 - Fuel Pressure Take-Off Union; Belt Retaining Pin; Exhaust Camshaft Hubs Immobilising Tool; Inlet Camshaft Hubs Immobilising Tool

139
ENGINE
CHECKING THE VALVE TIMING
Engine: XFU
Tools.
[1] Camshaft setting pegs : (-).0187.B
[2] Crankshaft setting peg : (-).0187.A
[3] Fuel pressure take-off union : 4192-T
[4] Belt retaining pin : (-).0187.J
[5] Exhaust camshaft hubs immobilising tool : (-).0187.F
[6] Inlet camshaft hubs immobilising tool : (-).0187.F
Remove the auxiliaries drive belt (see corresponding operation).
Checking the valve timing.
Remove:
- The power steering pulley.
- The roller/dynamic tensioner assembly (11).
- The crankshaft pulley (12).
- The upper timing covers (9) and (10).
- The lower timing cover (13).
B1BP2BKC
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 139