CITROEN C8 2005 - Calculating the Rear Height H2 C; Adjustment of Heights; Mechanical Pre-Adjustment

AXLES
SUSPENSION
STEERING
262
AXLE GEOMETRY: CHECKING AND ADJUSTING VEHICLE HEIGHT
Measuring the rear height H2M.
The rear height H2M is measured between the ground and zone «a» on the crossmember.
Calculating the rear height H2C.
Compare:
- The value measured H2M.
- The value calculated H2C.
- Adjust the front height if necessary.
Adjustment of heights.
Adjustment using a diagnostic tool.
This adjustment is done when the heights measured are within the tolerance of the heights calculated.
Mechanical pre-adjustment.
This adjustment is done when the heights measured are not within the tolerance of the heights calculated
(± 10 mm).
B3DP08HC
C5
B3CP06CC
All types except CARLSSON
CARLSSON
H2C = R2 + 68 mm.
R2 = Radius of rear wheel (mm)
H2C = R2 + 64 mm.
R2 = Radius of rear wheel (mm)
Angl. T3-page256-281-2005 4/02/05 15:25 Page 262