CITROEN C8 2005 - Engines: RHM - RHT - RHW; Plug CHC M12 X150-16 (X 1);M15 X150 (X 1 and 2); Pulley Screw M14 X150-70; Screws M7 X100-20 (X 4);M7 X100-40 (X 2);M12 X150-81 (X10);M16 X10-16 (X4)

70
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engines: RHM - RHT - RHW
Crankshaft
(1) Pulley screw M14x150-70
Pre-tightening 5 ± 0,5
Angular tightening 62°
(2) Screws M7x100-20 (x 4)
Pre-tightening 0,7 ± 0,1
Tightening 1,5 ± 0,1
(3) Screws M7x100-40 (x 2) (*)
Pre-tightening 0,7 ± 0,1
Tightening 1,5 ± 0,1
(4) Plug CHC M12x150-16 (x 1) 2,5 ± 0,2
(5) Plug M15x150 (x 1) 2,5 ± 0,2
(6) Plugs M15x150 (x 2) 4 ± 0,4
(7) Screws M9x100-24 (+loctite FRENETANCH) (x8) 4,8 ± 0,5
(8) Screws M12x150-81 (x10)
Pre-tightening 2,5 ± 0,2
Angular tightening (**) 60°
(9) Nuts M9x100 (x8)
Pre-tightening 2 ± 0,2
Angular tightening 70°
(10) Screws M16x10-16 (x4) 1 ± 0,1
B1BK3EPD
C8
(*) = Re-use prohibited.
(**) = Tighten in a spiral commencing from the inside.
Angl.T3-page032-190-2005 4/02/05 15:15 Page 70