73
ENGINE
(5) Alternator
(6) Spherical-base screw M10 x150-50 (x 2) 4,1 ± 0,4
(7) Screws M10x150-40 (x 1) 3,9 ± 0,4
NOTE: Tightening the fixings (6) before the fixing (7), to ensure that the
auxiliary drive belt is correctly aligned.
Alternator
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engines: RHM - RHT - RHW
Power steering pump
(1) Power steering pump
(2) Screws M8x125-30 (x 1) 2,5 ± 0,2
(3) Shouldered shaft screw M8x125-22 (x 1) 2,2 ± 0,2
(4) Shouldered shaft screw M8x125-48 (x 1) 2,2 ± 0,2
NOTE: Tightening the fixings (2) and (3) before the fixing (4), to ensure that
the auxiliary drive belt is correctly aligned.
B1BK3E7D
C8
B1BK3E8D
Angl.T3-page032-190-2005 4/02/05 15:15 Page 73
To Next Page
Loading...
