112
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: 6FZ
B1EP1BBD
B1EP1BCD
Peg the camshaft pulleys (5) and (6), using tool [1].
Remove:
- The screw (3).
- The crankshaft pulley (2).
- The lower timing cover (4).
IMPERATIVE: Never remove the crankshaft pulley (2) without pegging the crankshaft and
camshafts.
Slacken the screw (9) of the tensioner roller (8).
Turn the tensioner roller (8) clockwise.
Remove the timing belt (7).
Refitting.
Turn the tensioner roller (8), using tool [5a], to go past the slot «b».
Position the tool [5b] to lock the index «a» and remove the tool [5a].
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 112
To Next Page
Loading...
