146
ENGINE
B1EK006D
B1EK007D
CHECKING AND SETTING THE VALVE TIMING
Engine: XFW
Removing (continued).
Remove:
- The twelve screws (3) (6 mm external hexagonal adaptor).
- The seven screws (4) (7 mm external hexagonal adaptor).
- The two covers (5).
- The cover (6).
- The fixing screws of the power steering pump, then suspend the latter.
- The support (7).
NOTE: The camshaft pegging operation can be performed without slackening the
pinion screws or rotating the camshafts (using tools [5] and [6]; lightly oil the pegs
[1] and [2] prior to fitting).
Peg in the sequence:
- Camshafts, using tool [1].
- Crankshaft, using tool [2].
B1EK005D
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 146
To Next Page
Loading...
