154
ENGINE
CHECKING THE VALVE TIMING
Engine: 9HZ
Support the engine with a roller jack equipped with a block.
Disconnect the connector at "a".
Slacken the screw (4).
Remove:
- The screw (6).
- The nut (3).
- The 3 screws (5).
- The RH engine support and upper torque reaction rod assembly.
Turn the engine in the normal direction of rotation.
Peg the flywheel using the peg [1] at "b".
C5
B1BP305C
B1BP32DC
Angl.T3-page032-190-2005 4/02/05 15:15 Page 154
To Next Page
Loading...
