182
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines: RHM - RHT - RHW - 4HW
Removing (continued).
Disconnect the battery.
Move aside the header tank.
Position the tools for supporting the engine [10], [11], [12] and [13].
Remove:
- The scuttle panel grille.
- The torque reaction rod (1).
- The fuel unions (2).
IMPERATIVE: Plug the apertures using tool [13].
Protect the radiator harness with strong cardboard cut out to the dimensions of the radiator.
Remove:
- The RH engine support (4).
- The timing covers (3).
- The lower timing cover.
Peg the camshaft pulley, using tool [3].
Slacken the tensioner roller fixing (5).
Retighten the fixing to the position of maximum de-tension (tighten to 0,1 m.daN).
Remove the timimg belt.
B1EK1TTD
B1EK1T2D
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 182
To Next Page
Loading...
