66
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engines: RHL RHR
Crankshaft
Bearing cap fixing screws
Pre-tightening 2,5 ± 0,2
Angular tightening 60° ± 5°
Con rod nuts
Pre-tightening 1 ± 0,1
Slackening 180° ± 5°
Tightening 2,3 ± 0,2
Angular tightening 45° ± 5°
Accessories drive pulleys
Pre-tightening 7 ± 0,7
Angular tightening 60° ± 5°
Cylinder block
Piston skirt spray jet (renovation) 1 ± 0,1
Sump 1,6 ± 0,1
Timing belt guide roller 2,5 ± 0,2
Timing belt tensioner roller 2,1 ± 0,2
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 66
To Next Page
Loading...
