Clear-Com Tempest2400 - Tempest Part Numbers

Clear-Com®
Tempest®2400 2-Channel Wireless Intercom System 73
Tempest Part Numbers
Model Descripon
Tempest®
2400 Series BaseStaons
CM-222
Tempest® 2.4 GHz 2 channel, full feature base staon. Features one RP-TNC
RF antenna port, Remote Transceiver port, 2-wire, 4-wire, Stage Out, Aux IN,
Aux OUT, relay cluster, Sync IN, Sync OUT, USB, LAN, Belt Prog port and AC &
DC power inputs. Supports up to 5 wireless BeltStaons (in Normal Mode)
and an unlimited number of Shared BeltStaons. Comes with AC power
cord, USB cable, 1/8” stereo mini programming cable, one whip antenna
and T-Desk soware.
Tempest® 2400 Series BeltStaons
CP-222
Tempest® 2.4 GHz 2 channel, dual-listen wireless BeltStaons. Features
stage announce, call, remote mic kill, vibrate alert, internal antenna, 4-PIN
male XLR, program port and USB connector. Comes with 2000mAh Li-Poly
rechargeable baery and wall charger.
Tempest® 2400 Series Transceivers
CCT-RT
Tempest® 2.4 GHz Remote Transceiver. Allows remote transmit/receive
funcon with no loss of RF signal. Connects to compable BaseStaon via
standard CAT-5 RJ45 cable. Power is provided down the CAT-5 cable for up
to 1500 feet (450 meters). Comes with 15  (4.5 m) CAT-5 cable, mounng
bracket assembly and two whip antennas
Tempest® Series 5-Bay Baery Chargers
T-BC5
5-bay baery charger for charging Lithium-Polymer baeries outside of the
BeltStaon
Rechargeable Li-Poly Baeries
T-LP1
Tempest® 3.6VDC, 2000mAh rechargable Lithium-Polimer baery
Tempest® Accessories
PC-ANT-2dBO
2 dBi Omni-Direconal whip antenna with RP-TNC connector
PC-ANT-EXTDIR
9 dBi Direconal corner reector antenna with N connector
TMA-MB9DBANT
Mounng bracket for 9 dBi corner reector antenna for use with any 5/8”
stud
TMA-DMB5/8
Mounng bracket with two 5/8” studs for use with two 9 dBi corner
reector antennas PC-ANT-EXTDIR, two 5/8” stud mounng brackets TMA-
MB9DBANT and two RP-TNC to N 4 foot cables PC-ANTCABLE. Requires one
Bogen “C” clamp BOG-C1575B. Comes with two screws, #10-32 X ½” Phillips
Pan Head, to aach “C” clamp.
BOG-C1575B
Bogen “C” clamp for use with Mounng Bracket TMA-DMB5/8. Also aaches
directly to Remote Transceiver using two user supplied #8-32 X 3/8” Phillips
Flat Head screws. Bogen number C1575B
PC-ANTCABLE-20
RP-TNC to N coaxial low loss RF cable 20 feet in length
PC-ANTCABLE-10
RP-TNC to N coaxial RF cable 10 feet in length
PC-ANTCABLE
RP-TNC to N coaxial RF cable 4 feet in length
TMA-USBCHRG
Tempest® 5 VDC Wall charger with Mini-USB connector, US blades
TMA-USBCHRG-02
Tempest® 5 VDC Wall charger with Mini-USB connector, Mul-blade
00001398
USB to Mini-USB cable 6 foot in length
CX-WB-CAB15
RJ45 Ethernet cable 15 foot in length
00001390
USB A to USB B cable 6 foot length
CX-PRGM-CAB
1/8” to 1/8” stereo mini pairing cable 6 foot in length
00000637
Tempest® BeltStaon baery cover