Modules & Options
6 - 4 Setting Up SATA Mode (Optane™ or AHCI)
6
7. Select SATA Mode (see page 5 - 16), press <Enter> and select “RAID Mode.”.
8. Select “Save and Exit”.
9. As the computer restarts press <F2> to enter the BIOS again.
10. Go to the Advanced menu and you will now see the Intel(R) Rapid Storage
Technology (Advanced menu) item. You can and press <Enter> to check the
information.
Figure 6 - 1
SATA Mode Set to
RAID
Figure 6 - 2
Intel(R) Rapid
Storage Technology
To Next Page
Loading...
