1 - 4 System Startup
Quick Start Guide
1
System Startup
1. Remove all packing materials, and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3. When first setting up the computer use the following procedure (as to safeguard the computer during
shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and
initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the left of the computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter and leave it there for 6 seconds or longer.
• Remove the adapter cord from the computer’s DC-In jack, and then plug it back in again; the battery will now be unlocked.
4. Use one hand to raise the
lid/LCD to a comfortable viewing angle (
do not exceed 130 degrees
);
use the other
hand to support the base of the computer (Note: Never lift the computer by the lid/LCD).
130°
Shutdown
Note that you should al-
ways shut your comput-
er down by choosing the
Shut Down command
in Windows. This will
help prevent hard disk
or system problems.
Figure 1 - 1 - Opening the Lid/LCD & Computer with AC/DC Adapter Plugged-In
To Next Page
Loading...
Need help?
General
