To Next Page

To Previous Page

4G Module SIM Card Installation 1 - 17

Quick Start Guide

4G Module SIM Card Installation

(For Models with 4G Modules)

Insert the SIM card as illustrated below (pay careful attention to the orientation of the card as the gold contact

side of the card should face upwards towards the top of the computer) until it clicks fully into position. To eject

the card simply press it until it ejects, but do not attempt to eject the card while connected to a 4G network (see

below).



SIM Card Ejection

Simply press on the SIM card to

eject it, however do not do this

while a connection is in prog-

ress.

If you do eject the card while a

4G connection is ongoing, you

will need to shut down the sys-

tem, reinsert the SIM card, re-

start the system and then

reestablish the 4G connection.

If you wish to change SIM cards

then you will need to shut the

system down, reinsert the SIM

card, restart the system and

then reestablish the 4G connec-

tion.



SIM Card

Orientation

Note that the SIM card’s

readable side (with the

gold-colored contacts)

should face upwards as

illustrated.

Figure 1 - 9

SIM Card Insertion

Clevo P955ET Series User Manual

Questions and Answers: