Modules & Options
6 - 52 PC Camera
6
Taking Pictures/Capturing Video
1. Make sure the PC Camera is turned on by using the Fn + F10 key combination (or
Control Center button).
2. Run the Camera app from the Start menu by clicking on the Camera app icon
(you can type “camera” into the search box to find the Camera app).
3. Click to select either photo or video modes.
4. Click the photo icon to take a picture.
5. Click on the video icon to start video capture (when video capture begins a
timer will appear at the bottom of the screen).
6. To stop video capture click the stop button (you can also pause the video
capture).
Figure 6 - 43
Video Camera
Recording in
Process
To Next Page
Loading...
Need help?
General
