Modules & Options
6 - 22 Fingerprint Reader Module
6
6. You will be instructed to swipe the same finger across the reader a number of
times (this may be in excess of 20 times).
7. Try to present different parts of your finger in different positions (similar to the
various positions you may use when using it, and if you see red at any point try a
different position).
8. Click Close when complete.
9. You can choose to Add another finger (this is recommended) or Remove the
current fingerprint reading.
10. You can now scan your fingerprint to log-on to the computer.
Fingerprint Sign-In Issues
If at the Windows Hello screen, the Fingerprint reader fails to recognize the fingerprint
3 times it will then block access to the computer.
In this case you will need to use your PIN (the PIN you used when initially setting up the
fingerprint reader) to access the computer. Alternatively you can sign-in using your win-
dows password.
After using the PIN code (or windows Password) to access the computer you can go to the
Settings > Accounts > Sign-in options if you wish to change any settings.
To Next Page
Loading...
Need help?
General
