EasyManua.ls Logo

ClimateMaster MPC User Manual

ClimateMaster MPC
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MPC MULTIPROTOCOL DDC CONTROLS
Application, Operation & Maintenance
97B0031N01
Revised: November 19, 2018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ClimateMaster MPC and is the answer not in the manual?

ClimateMaster MPC Specifications

General IconGeneral
BrandClimateMaster
ModelMPC
CategoryController
LanguageEnglish

Summary

MPC Controller Overview

MPC General Specifications

Additional Information

BACview6 Service Tool and Addressing

Addressing & Power Up

Details setting the module's hardware address using rotary switches.

Equipment Touch Service Tool Overview

MPC LED Codes

MPC Sequence of Operation

Multi Generation Water-to-Air Points Matrix

AUX CFG and Supply Fan Settings

Details configuration settings for AUX output (AV:31) and Supply Fan (AV:33).

MPC Feature Configuration

RNet Sensor Setup

Details setting up RNet sensors, including alarm enables for up to 5 sensors.

AUX_CFG Functionality

Explains AUX_CFG functionality and its dependence on AV:31.

MPC Wall Sensors

ASW 13,14,15 Wall Sensors (RNet)

Details ASW 13, 14, 15 sensors for RNet, including features and options.

ASW 06, 07, 08 Wall Sensors (LSTAT)

Describes ASW 06, 07, 08 LSTAT sensors, their features, and models.

Android App Installation

Covers installation and setup of the Android App to replace the Equipment Touch module.

MPC Technical FAQs

Frequently Asked Questions

Addresses common technical questions about MPC operation, wiring, and sensors.

Equipment Touch Manual

MPC Setup/Status Screen

Core Setup Screens

Accesses screens for temp, compressor, sensor setup, and maintenance.