ComAp IGS-NT Series - Communications; Available Communication Ports

IGS-NT Installation Guide
103
12. Communications
12.1. Available Communication Ports
Hardware Type
Communication Ports
IG-NT
RS232(1)  RS485(1) – multipurpose
CAN1
CAN2
IG-NTC
RS232(1)  RS485(1) – multipurpose
RS232(2)  RS485(2) – multipurpose
USB
CAN1
CAN2
IG-NT-BB
RS232(1)  RS485(1) – display dedicated
CAN1
CAN2
IG-NTC-BB
RS232(1)  RS485(1) – display dedicated
RS485(2) – multipurpose
USB
Ethernet
CAN1
CAN2
IS-NT-BB
RS232(1)  RS485(1) – display dedicated
RS232(2)  RS485(2) – multipurpose
USB
CAN1
CAN2
IS-NTC-BB
RS232(1)  RS485(1) – display dedicated
RS485(2) – multipurpose
USB
Ethernet
CAN1
CAN2
IM-NT
RS232(1)  RS485(1) – multipurpose
CAN1
CAN2
IM-NT-BB
RS232(1)  RS485(1) – display dedicated
CAN1
CAN2
IM-NTC-BB
RS232(1)  RS485(1) – display dedicated
RS485(2) – multipurpose
USB
Ethernet
CAN1
CAN2
NOTE:
RS232(1) – RS485(1) and RS232(2) – RS485(2) can be switched and only one port at a time
is available for communication.